Often called grumbler, croaker is a Sciænidae marine fish. Its size is typical from 50 to 100 cm. However, it can exceed 2 meters for every 100 kilograms. It’s a group animal, but its capture is very fast. Naturally provided that the rules are observed and that adequate fishing techniques are used.
The croaker: way of life, habitat and reproduction
Its name is derived from the noise it emanates as it is being reproduced. However, this is not the only name it can use. Some use the term “skinny” because of its white flesh. It is a fish that recalls a slightly flattened spindle on the ends. It can support two distinct dorsal fins with its rounded reverse. The one is long, gentle and the other pretty stubborn.
The croaker is a fish with many colours. The flanks and bowels are pale and blue, while the fine fins and tails are silver yellow. The dark gray back gives a purple feeling as seen by the water. It has an orange-yellow interior in a big mouth. Add many black and yellow dots all over your hand. To all this is added.
Where can they be found ?
In the region between Mauritania and Bretagne the smaller ones are present in large numbers. However, we can find this fish especially in the tropical Atlantic and the Mediterranean. The Gironde Estuary, Norway, Sweden and Iceland have been identified as well. There are, however, only two officially recognised inventories. Bay of Bizkaia and Mauritania. This one. Lean Europeans have a great deal of flattened trout. Learn more about croaker from fishing specialists and export this type of fish for further information.
Fish from Croaker are seafood living on the bottom of the waters. You travel in groups, so as not to get out of the rocky, defective and cavernous ground. In case of risk, these places serve as shelter. They move from Mauritania to Morocco seasonally every year. This migration is due to changes in temperature. The temperature ranges of these fish vary from 14 °C to 23 °C. Furthermore, their tolerance for salinity is 40 per 1000. The grumblers cover nearly 1,000 kilometers during this migration time. They are fleshy fish. Squids, mules, sardines, seagulls, crustaceans, and sprats are especially fond of them.
Reproduction and growth
Growlers are generally grown from October to April / May. The Gironde reproduces, on the other hand, between April and July in spring. Fish utter typical groans for the gathering during the matching season. The movements of its muscles on its swimming bladder cause certain groans. Fishermen will find this. This is why.
When babies are born, it takes 5 months for them to develop to a size of 10 cm. They are around 45 cm in height and weigh up to 1.5 kilograms at two years of age. The life expectancy of these fish is 15 years. They will weigh at this age about 20 kilograms, for a length of approximately 100 20 centimetres. For the weight between 60 and 100 kilograms, South species and Morocco may reach a length of 2 metres.
How to catch croaker?
Prior to fishing, remember that flaky fishing is an operation that is monitored. France’s declaration to safeguard and conserve fishing resources has been passed since 26 October 2012. This decree restricted fishing for recreational activities shorter than 45 centimeters. This scale is set at 30 centimeters for skilled fishing.
However, the fish are spotted by their grunts. The vessel must therefore be upright relative to the lean party. Otherwise, the noise produced by the fish can not be seen. The thin man is quickly captured until he’s found. Just because it is a timid fish that bites on bait quite quickly. As a lure, only his favorite foods have to be used. They can be used in strips or totally alive or dead. There are several potential fishing techniques. Drift fishing, supporting fishing or free line fishing can be chosen depending on your preferences.
For beginners, drift fishing is a favorite fishing method. Only because it requires less technological expertise in its work. It is also the best way to fish for most vessels.
This technology involves letting the wind or the current go the same way. Drift fishing exists in three groups. The first of these 3 fishing groups is the small drift, which is only aimed at rock fish. We’re practicing it about 100 m from the ground. No special material is required for this type. You can use 25/100 or 30/100 wire to create the chief. We are on average drifting above 100 meters. The material starts changing there. Larger rods and at least 60/100 leader must be chosen. Lastly, deep-sea drift fishing takes place. This is not unlike the average drift except the use of a winch or an electric roller. Naturally, this version makes it possible to fish in depths a rod could not reach.
Fishing to support
The method involves the placing on the seabed of a weighted and baited platform. This platform is a leader that contains three hooks that enable catching all the around fish. This technique is simple to execute at first glance. But once a precise objective is captured, it becomes more tactical in its execution. First, the sector where the desired fish is located must be targeted. The assembly must then be configured so that it can be adapted to meet the requirements. Conditions like the feeding area (bottom or open water) for fish and the occurrence or absence of current. In the latter case, the power of the current will primarily be assessed.
The undeniable benefit of this fishing strategy is. If one of the hooks breaks, simply unclick the bead and replace it with a new chief. You won’t have to replace the whole chief any longer. Speed and economy are both guaranteed.
Free line fishing
It is also known as man-fishing or casting. The idea is to mobilize the fish. With a lure and a bait, we cast the thread. Then we lower it to the desired depth and return it to you. This repeats the process, which varies each time between the objectives. This is probably the least successful method for meager fishing of the three. But its scope still remains substantial if the right fishing area can be targeted.